How to Install a Face Pad on the Pico.

Step By Step Directions

Align your Pico device on a table face down with the nose section closest to you.
Ensure the headstrap pulled above the device and is out the way.
Align the facepad in the same direction the device is facing.
Start by pushing one of the top corners of the facepad into the groove on the Pico device.
Slowly push the the facepad under the plastic lip around one side of the device.
The start in the other top corner and repeat the process of pushing the pad into the groove.
The nose section of the liner will not tuck in the plastic. Lightly pull the nose out and align it before giving it a light push back into place.
If the liner is properly installed on all 4 sides, it will stay in place during normal usage.